Jump to content

Register Now

Posted Image
Welcome guest, thank you for visiting the MainelySubarus forums! Register today to enjoy the benefits of:

* Informational updates and news concerning the latest Subaru related information, updates, recalls, and more.
* Share and track your Subaru and the unique modifications you have done with our custom Members Garage.
* Finally make friends and have fun discussions in regards to Subaru's and modifications.
* Post and make new threads in a safe and fully moderated environment without the worry of harassment like on other larger forums.
* Users can share their insights and opinions on stores, purchases, and vendors.
* And many many other benefits, register today to experience them all!


Photo

Anyone know about this code? U0073

- - - - -

  • Please log in to reply
21 replies to this topic

#21
OFFLINE   Gretsch308

Gretsch308
  • Member
  • 1,059 posts
  • Joined 10-August 11
  • LocationNorth Waterboro
  • Real Name:Joe Rotford
  • Vehicle:2011 SSM WRX Limited
Garage View Garage
Ya it's weird.



#22
OFFLINE   Fireklown

Fireklown
  • Member
  • 1 posts
  • Joined 03-August 17
  • LocationEagan, Minnesota
  • Real Name:Tony
  • Vehicle:2008 Saturn Aura XR

I know this thread is old but it should help anyone like me who comes looking for answers. I Just had this problem with my 2008 Saturn Aura XR. The U0073 code refers to the Body Control Module not having a solid connection anymore. This causes a variety of problems that are not really problems. Here is a fix I found that worked like magic for me and anyone with a 2008-2009 Saturn Aura can do, and hopefully help owners of others vehicles.

Remove the passenger side kick plate (Saturn hides your electronics here) If you are sitting in the passenger front seat, just to the Left of your Left leg is a "side panel" just below height of your ash tray. Pull gently from the front of this panel ,you'll see a small hole to grab,(velcro there) and gently unsnap a little at a time. Panel will come off. 

Find the Body Control Module (you will see several fuses and connectors attached to it. Look for the two that appear to be housed by a small plastic harness(Mine had blue colored plastic). Fit a flat head screw driver into the latch, and unlock the plastic harness (it will slide upward over the module). You can then unplug the modules and you'll see numerous tiny thin metal prongs that it snaps onto. Get some DiElectric grease from you local parts store and take a small paint brush (1/4" type) and swab the grease onto each of the metal prongs. Snap the module in and out a couple times to spread the grease around, and then snap it in and lock it down. Do the same for the other module. Then put the panel back on and drive it. My problems were cured, I hope the same for you.







2 user(s) are reading this topic

0 members, 2 guests, 0 anonymous users