Recently I have come into a full set of Enkei Bortex RPM2 18"s off of an Audi.
18x8 +35225/40/R18 Nankang Ultra sports NS2
I have found wheel adapters on Ebay: http://www.ebay.com/...h-/131052394918
The adapters do not have the hubcentric ring and are 57.1mm center bore. The add says that they are good for 57.1 or smaller hubs. I am wondering if the adapters need to have the ring at 56.1mm to match my existing hub bore or if the 1mm space will make all that much difference. I have read, http://www.edition38...howtopic=474715 and here http://legacygt.com/...sei-148042.html and a few other places regarding this issue and it seems that people are using tape to take up the difference. Has anyone had a similar issue and fixed it in this manner with no problems?
Also, with the adapters on will I have to modify my fenders or anything else or is the clearance of the XT enough to allow proper fitment? I have stock suspension.
Thanks for any input ahead of time