Search results for query: *

I am looking for stock rear springs for an 05 outback wagon. Or a pair of similar spring rate rear springs that would fit. Basically I went to replace rear shocks and noticed the right side coil was cracked. 2072408281 Thanks

I bought a 99 forester in hopes to use the ej25 for a different car, run great. Feel free to make an offer on the engine or any other parts you may need 2072408281

I have a complete 99 loaded forester, 5 speed, 168k on it. Other than the engine every part on the car is up for grabs. Stock alloys have worn tires. Prices will be very fair. Feel free to text me or call 2408281 Thanks

I have Thule load bars with clamps to fit cars that have factory racks. I also have the Thule ferring and two bike attachments. Below is a link to my Craigslist add. I just need em gone. Fair offers will not be refused. http://maine.craigslist.org/pts/4520928138.html

I am looking for a good condition ej25 shortblock. I would buy a complete engine or longblock if needed tho. 

Looking for an engine for a friends outback, threw a rod through the block. Would anyone be able to direct me to the info or care to chime in on what other year ej25's longblock i could swap in? I have been using car-part.com and have called norms used cars as well as some other local yards...

07 legacy needs engine, pm for details

I am looking for an engine that will be compatible with a 07 outback, 2.5 n/a. Interested in either a longblock or dressed engine. thanks

I have a 05 legacy with 130k on it. It has developed a noticeable tick over the last month that has not seemed to get any worse. Any suggestion on what could be causing it? Should I try and check the valve clearance first? The tick is rpm and load dependent. It increases in frequency with rpm...

I have been trying to get back into a outback wagon as my daily driver, this car has been on Craigslist for months, started at 7900 and now it's down to 5900. It's at a small dealer/mechanic. He doesn't offer a 30 day warranty but it dose come with temp plates. It's got a clean title, it's been...

G111 alignment machines for sale. These are older machines that date back to the mid 90's. One machine is fully functioning but the other could be fixed or used for parts. The first one has 4 heads that fit 10"-20" wheels, while the second machine has a bad display which can be repaired by a...

I have a 97 outback that I have been driving as my winter beater for the last 2 years. A little too much fun on logging roads tonight in deep puddles has left some engine damage. The engine will not idle and puffs white smoke. Car was on its way out to begin with, 275,000 miles, with many worn...

A friend of mine owned a 92 wrangler untill last winter when I purchased it from him. We did a basic restore on it 2 years ago, new floor pans, suspension overall etc. The rear portions of the frame rails were not salvageable due to rust so we had a local fab shop make new sections and weld them...

I haven't been around the forum much lately due to engineering classes taking up most of my life. I have been working on formula SAE car for umaine for the last 3 years now and it has been great. We are going under a chassis redesign at the moment and looking for a local supplier of tubing. We...

I have called around to a few of the chain autoparts stores and none of them seem to rent the DOHC tool. Do any of you guys have a tool that you would want to rent? I don't mind paying a decent deposit so you know it will be returned. I am located in Poland, and visit both Portland and auburn...

Last fall I picked up a tired 97 legacy outback wagon with 285k on it from a friends mother. The car was only 300 bucks and just needed a radiator. I have noticed in the last few weeks that the vent line to the overflow is pressurized all the time and bubbles even after the car is up to temp. Is...

I am looking for a set of all 4 swaybar endlinks for my 98, let me know if you have anything laying around

I just upped my tire size and am in need of a light fender roll. I am looking to rent a fender rolling tool if anyone has one. I figured I would ask on the forum before I rented one online--thanks

I was wondering if any of you bangor/brewer area guys know of an alignment shop that is good and dosent mind dealing with custom alignment specs--thanks

I have a k and n 33 2154 filter, used for maybe 500 miles then changed the intake, free to anyone who wants to pick it up at my place in orono