Camber bolt question

[Zach]

Last week or so I went for an alignment at EG and all was well except for the camber on the rear right side.

This is what the print out says the spec are for the rear.

Rear left: -1.2

Rear right: -2.2

I'm running stock springs on KYB Excel-G struts and was wondering if I bought some camber bolts if that would fix the issue. Also are the camber bolts front and rear specific or are they the same all the way around? I was planing on getting the Whiteline camber bolts.

 

[Apollyon12]

Yes, that issue can be fixed with the camber bolts.

I don't think the bolts are F/R specific, check whiteline, if they have different part numbers then they are.

Remember that you will need to get another alignment. It's also probably wiser to have the Tech install them for you. Front and rear are done differently.

I still have a set that I am not using. $50

http://fastwrx.com/wrx1orcaad.html

 

[Zach]

Yes, that issue can be fixed with the camber bolts.

I don't think the bolts are F/R specific, check whiteline, if they have different part numbers then they are.

Remember that you will need to get another alignment. It's also probably wiser to have the Tech install them for you. Front and rear are done differently.

I still have a set that I am not using. $50

http://fastwrx.com/wrx1orcaad.html

Well that's good. Where are you located? I'm interested in the cam bolts, but not for $50 the link you gave me they are only $39.

 

[Apollyon12]

I have two sets, Front and Rear. $50 for both.

I'm in Sanford.

 

[Zach]

I have two sets, Front and Rear. $50 for both.

I'm in Sanford.

Can you PM me your address? I should be able to pick them up after the 17th of July.

 

[HR radness]

If he changes his mind I will take them off of your hands