3" Header-Back Exhaust - $200

Apollyon12

Apollyon12

Active member
Exhaust 9-2-09 (2).jpg Exhaust 9-2-09 (4).jpg

Exhaust 9-2-09 (5) - Small.jpg Exhaust 9-2-09 (6) - Small.jpg

Exhaust 9-2-09 (1).JPG

Ebay Special 3" Exhaust. Bellmouth, I was originally told that is has two high flow cats, one in the downpipe with a flex joint and the other in the mid pipe, but they appear to actually be resonators. Angled 4" tip without a silencer (I don't have it), bung for the O2 sensor. The uppipe has a flex joint and I never installed it. The downpipe is longer than the stock piece as you can see in the pics, so I don't think it's a good idea to split this up unless someone can confirm that other DP's are this same length and that the separate pieces will fit with a different manufacturers items.

Works great, get's you to the fun of stage 2 without the high cost and if it rusts out you can buy a new one or upgrade. The welds look pretty good and the fit did not give me any problems. It has been removed and is ready to go to a new home. I am already sorry to give up the nice sound but it just doesn't fit with building a sleeper.

Looking for $200 and if somebody pays the asking price I can provide a place to install it and lend a hand.

I'd also be willing to trade for something useful. I am going to need new set of summer and snow tires next year so if somebody had a good used set, open to almost anything subaru or I need a mower and weedwacker. Or an donut flange cat-back that isn't angled or huge, something like a Bosal or a Borla.

SOLD!!!

 
Last edited by a moderator:
If you part it out, I'll probably take the dp/up
default_frown.gif


That actually looks like the same guy you bought yours off of if you look at the history ... haha

 
Last edited by a moderator:
What would you be willing to spend for the dp/up?

Although I think I would have a fairly hard time selling just the mid pipe and the muffler. But feel free to prove me wrong, folks.

HaHa you are right. It is the same guy...

I knew there was something fishy about him.

 
Last edited by a moderator:
Here are some pics, just took them.

IMG_0224.JPG

IMG_0225.JPG

IMG_0226.JPG

It hangs a little low because of my trailer hitch. I am using one KB long hanger and one OEM on the muffler. The mid pipe has the oem hanger but I really need to switch it out for the KB one as it is a little stretched. I would be willing to throw in the three KB hangers that I would not be using with the sale.

 
Last edited by a moderator:
I have a buyer for the cat-back, but the downpipe and uppipe are still for sale. Unless someone wants to buy the whole thing of course.

 
Sombody on Nasioc said that the DP is a different length than the stock/standard size. I can't confirm this but I will be taking some pictures of the stock DP next to this one when I swap it out.

I think you would be better off buying the whole thing than trying to piece it together. Of course, you are right up the street, you can come take a look any time.

I'm pretty sure they (not sure who they is) sell an adapter.
Click to expand...
I also think that Grimspeed is working on an adapter. And I believe MadDad had one but I don't know if it would work. And any exhaust shop could do it for you, but you would probably end up spending the same as the whole thing anyways.

 
Last edited by a moderator:
If you part it out, I'll probably take the dp/up
default_additional_sillylol.gif

That actually looks like the same guy you bought yours off of if you look at the history ... haha
Click to expand...
and I'd take the muffler Finally got pulled over for that hole in mine..
default_additional_sillylol.gif


 
Updated pics and info.

I am looking to sell as a set. I don't believe that it will work with another manufacturers parts.

 
still for sale? would this fit on my car? im thinking about picking this up but not 100 percent yet lol. You said ur looking into trades right? Well i work at tire warehouse in portland what size tire do u run?

 
You must log in or register to reply here.
Back
Top