4WRXter
Skier!
I bought a RSB off a different forum. It was advertised as WRX fitment, but when I tried to install it, I discovered it is too wide. Hence I SUSPECT it is for an STi. I also ASSUME it will fit Foresters. For full disclosure, I am not positive on either of the last statements. I included pix of the measurements inside and outside of the mounting tabs. According to the link at the bottom of this post, it should be able to be used on WRXs or GCs. If I don't get my asking price, I will probably end up installing it on my WRX.
The bar comes with heavy duty mounts and bushings. I'd just like to get what it cost me, back. $200
Again, I will be completely honest. I know the following pix would be easy to fudge, but I hope the members that know me, Know that I wouldn't do that.
Here is the measurement outside the tabs, which would be the true mounting spot.
44 15/16" outside the tabs
Here is the measurement inside the tabs which may work for WRX's or GC's.
44 9/16" inside the tabs
Also here is a link for reference.
http://forums.nasioc.com/forums/showthread.php?t=1303381&highlight=obs+rear+sway
The bar comes with heavy duty mounts and bushings. I'd just like to get what it cost me, back. $200
Again, I will be completely honest. I know the following pix would be easy to fudge, but I hope the members that know me, Know that I wouldn't do that.
Here is the measurement outside the tabs, which would be the true mounting spot.
44 15/16" outside the tabs
Here is the measurement inside the tabs which may work for WRX's or GC's.
44 9/16" inside the tabs
Also here is a link for reference.
http://forums.nasioc.com/forums/showthread.php?t=1303381&highlight=obs+rear+sway
