Headlight Retrofitting Services, Ready To Roll!

apkarian100

Vendor
I am now offering headlight projector retrofitting, for your Subaru! Experience the ultimate in headlight enhancements.

Here are some ideas(Pics courtesy of LightWerkz):

Forester:

kenforester5.jpg


08+ Impreza:

DSC_0001Rajiv_sImpreza.jpg


04-05 Impreza:

chau5.jpg


02-03 Impreza:

blackedusdmretro3.jpg


93-01 Impreza:

Oct212010_0369thinh.jpg


Pricing:

Installation Labor Charge: $150

Parts (Individual parts pricing ranges from lowest quality to highest quality):

Projectors (Pair): $125-$200

Ballasts (Pair): $50-$165

Bulbs (Pair): $45-$95

Projector Shrouds (Pair): $25-$50

Retrofit Kits:

Basic Morimoto HID kit: $275

MorimotoMiniKitl.jpg


http://www.theretrofitsource.com/product_info.php?cPath=24&products_id=227&osCsid=021fb2962b58308a4bc81e4840fe7892

FX Projector HID kit: $315

TRS%20FX-R%20Stage%203%20Kit%201l.jpg


http://www.theretrofitsource.com/product_info.php?cPath=24&products_id=141&osCsid=021fb2962b58308a4bc81e4840fe7892

You the customer also have the choice of buying your own HID equipment. I can and will install what you'd like to use.

Please PM me with any questions or interest.

Thank You

 

Nate

Founding Father
Oooooooo... What do you recommend for use on a bulb with the high beam projector in the 08+ headlight. I would sort of think that a projector for your highbeam would be pretty counter productive to what its supposed to do, but damn if that doesn't look HOT!

 

apkarian100

Vendor
I would just use a regular D2S bulb, but instead would find a projector without a cutoff shield, to allow maximum light output.

Oooooooo... What do you recommend for use on a bulb with the high beam projector in the 08+ headlight. I would sort of think that a projector for your highbeam would be pretty counter productive to what its supposed to do, but damn if that doesn't look HOT!
 

Jamey

New member
I have a 2011Imprezza ,already have h11 bulbs and ballasts how much and how long u need them?

 
Last edited by a moderator:

apkarian100

Vendor
Those wouldn't take me long at all. How about $50-$100? I'm leaning more towards $50, as I don't see too much custom work needed to make them fit. It would probably take an hour or so to do. If you don't mind taking the journey to my house, you can watch me install them for you.

I have a 2011Imprezza ,already have h11 bulbs and ballasts how much and how long u need them?
 

Jamey

New member
Those wouldn't take me long at all. How about $50-$100? I'm leaning more towards $50, as I don't see too much custom work needed to make them fit. It would probably take an hour or so to do. If you don't mind taking the journey to my house, you can watch me install them for you.
Where do you live ? That just for parts or is that full price

 

apkarian100

Vendor
I live in Alton Bay, NH. The price is for the whole thing, being you already have the parts I need. Send me a PM if you want to set up a day for install and we can go from there.

Thank You

Where do you live ? That just for parts or is that full price
 

IBratmanI

Subaru Ambassador- AdidaSubarus
That looks awesome. I already have an HID setup installed, so would that be able to be used to cut down on costs?

 

apkarian100

Vendor
Which type of HID kit do you have. The problem I see first off running into is the HID projectors will use D2S bulbs whereas the bulbs in your OEM setup are not D2S. If you have a certain specific HID kit, you can actually swap out pigtails to be able to run D2S bulbs.

That looks awesome. I already have an HID setup installed, so would that be able to be used to cut down on costs?
 

IBratmanI

Subaru Ambassador- AdidaSubarus
Ok, so if you could, pm me a price on the total cost of doing this to my lights. And FYI, my lights are already painted black inside

 

Ryan

New member
Very interested in your work. At some point down the road I've got to swap out my JDM projectors with TSX projectors. Would it be a flat $150 if I supplied the projectors?

 
Last edited by a moderator:

apkarian100

Vendor
Yep, I'll still offer my flat rate $150 fee for your work. Send me a PM when you are interested and we can set up a time to meet.

Thank you

Very interested in your work. At some point down the road I've got to swap out my JDM projectors with TSX projectors. Would it be a flat $150 if I supplied the projectors?
 
Top