oh5xt
New member
So after replacing the radiator in my FXT the temp gauge is still spiking! I checked for leaks and didn't find any so now I'm lost!
New radiator PLEASE HELP!
- Thread starter oh5xt
- Start date
Nigel Prodrive
Dirt surfer
Refilling coolant on turbo engine is a 3 step job. Fill rad to air drain hole, then top filler hole up to neck, then coolant reservoir to "full" level. Easy to get air bubbles, which make for temp spikes.
Go here for detailed procedure (see chapters 10 & 11): http://ken-gilbert.com/wrx/STi_Manual/
Go here for detailed procedure (see chapters 10 & 11): http://ken-gilbert.com/wrx/STi_Manual/
Last edited by a moderator:
oh5xt
New member
Ok that makes sense, I will do that when I get home from work. Thanks for the info!
Tyler
Active member
I was having this issue. When I noticed the temp start to spike after changing mine, I pulled the coolant cap off (with a few rags to prevent getting sprayed ... take cap off slowly) and found that the reservoir was filled with air. I'm assuming it was in the line and just collected at the top. I then refilled it with fluid and it happened a couple more times. It's fine now though!
G'luck.
G'luck.
Last edited by a moderator: