phase one 2.5 crank

[kblood477]

As it says im looking for a good phase 1 2.5 crank that doesn't need machining done

 

[Chris]

I don't know exactly what you're doing, but you can use a phase2 SOHC engine with DOHC pistons and DOHC heads. If that's what you're trying to achieve, then you end up with the 52mm rod bearings vs 48mm phase1. 99 DOHC engines are a 52mm block with dohc pistons already in them, if you find that.

 

[kblood477]

Im building a 2.35 stroker out of my 2.2