struts 06 WRX sedan

Pedro

Pedro

٩(͡๏̯͡๏)۶
STi struts would be nice (clunks are fine)

or a suggestion of replacement struts to mate with STi springs.

default_biggrin.png


 
http://www.turninconcepts.com/product_info.php?cPath=1_9_7_486_498_515_1065&products_id=544
right there my man
Click to expand...
LOL those are my exact struts! I took those pictures of my DSpecs for TIC back when i first got them
default_biggrin.png
:wh:

CVR motorsports a nasioc vendor sells them for like $20 cheaper...

http://forums.nasioc.com/forums/showthread.php?t=1616368

But yes, get them. And the remote adjusters too so you don't have to take your backseat out every time you want to change the damping on them.

http://www.turninconcepts.com/product_info.php?cPath=1_9_7_486_498_513&products_id=543

 
ok so what's the deal with the spacers in the rear? Andy, you use them with your setup?

 
ok so what's the deal with the spacers in the rear? Andy, you use them with your setup?
Click to expand...
Scooby 921 spacers are needed if you use our rear stock top hats. All you need to install are the struts and the 921 spacers for just the back two struts to fill a turned down section. You could have measured my spacers and made your own two days ago....but now they're on the car.

Keep in mind the only camber plates that fit with the DSpecs are the old v1 RCE ones, and the whiteline ones with the TIC deep nut.

 
You must log in or register to reply here.
Back
Top