Saggy butt with spacers

[i-wagon]

My 07 imp has saggy butt even after half inch spacers and replacing struts last spring. Wondering if there are stiffer ones from another scoob that would keep a similar ride height, or if I should just get king springs. the womans golks have 2 96 outbacks I guild rob springs from even if I had to cut them (not with a torch or other heat generating device, I know that changes the temper and affects the ride)

 

[Pedro]

WRX springs will be a bit stiffer (and a tad lower).  I am not sure on the outback springs fitting.

 

[i-wagon]

If anything I want a touch higher, I treat this thing like a truck

 

[Pedro]

kings will probably fit the bill better.

or forester springs.  I think I have read about that in the past.

 

[2point5RS_Dan]

I have bolt in ready to go forester struts and springs. You may need different top hats + the rear camber might change. YMMV

 

[IBratmanI]

Forester struts would bolt in and have the same top hat bolt pattern.

 

[i-wagon]

Thanks for the input guys, going to reassess after I get the hg done

 

[2point5RS_Dan]

Sounds good, I'm the one to talk to if you want to go forester struts. I get shipments in all the time