2point5RS_Dan
HATER DAN
Bring me your trailing arms and forward trailing arm bushings and I will give you a trailing arm with bushings pressed in.
I have a set of spare trailing arms ready for TiC bushings. If you bring me a stock arm I'll press in the bushings into the spare and send you on your way, keeping your stock arms to prep for the next person in line, as long as your trailing arms aren't damaged or a different length.
Takes me about two hours to get the old bushing / sleeve out and cleaned up.
All you have to do is unbolt the rear 17mm bolt and front 17mm nut/bolt combo. If it doesn't come out, your bolt is frozen to the bushing sleeve. Buy new bolts along with your bushings. Unblot the trailing arm bracket which is 3 bolts and I'll sawzall the stuck bolt out for you. Also two or 3 12mm bolts for the abs and ebrake lines.
I am super busy the next few weekends due to NEFR prep, but post July I will do this any weekend I'm around.
http://turninconcepts.com/product_info.php?cPath=1_9_7_479_43_1329&products_id=1149
These are the best bang for the buck bushing you can do on an impreza or early legacy in my oppinion. You are on your own for doing the rear trailing arm bushings.
I have a set of spare trailing arms ready for TiC bushings. If you bring me a stock arm I'll press in the bushings into the spare and send you on your way, keeping your stock arms to prep for the next person in line, as long as your trailing arms aren't damaged or a different length.
Takes me about two hours to get the old bushing / sleeve out and cleaned up.
All you have to do is unbolt the rear 17mm bolt and front 17mm nut/bolt combo. If it doesn't come out, your bolt is frozen to the bushing sleeve. Buy new bolts along with your bushings. Unblot the trailing arm bracket which is 3 bolts and I'll sawzall the stuck bolt out for you. Also two or 3 12mm bolts for the abs and ebrake lines.
I am super busy the next few weekends due to NEFR prep, but post July I will do this any weekend I'm around.
http://turninconcepts.com/product_info.php?cPath=1_9_7_479_43_1329&products_id=1149
These are the best bang for the buck bushing you can do on an impreza or early legacy in my oppinion. You are on your own for doing the rear trailing arm bushings.